What are the applications and characteristics of rubber sheathed cable equipment?

What are the applications and characteristics of rubber sheathed cable equipment? Rubber sheathed cable is mainly suitable for some light electrical, electrical equipment, projection lighting equipment and various household appliances. Since the rubber-sheathed cable equipment needs to be moved, dragged, bent and folded frequently during use, most of the rubber-sheathed cable equipment is smooth and tidy

2022-12-05

The advantages and influencing factors of rubber cable equipment are introduced, come and collect!

Rubber cable equipment is a kind of general cable, its material is natural rubber, the development trend of the middle and late gradually transformed into the present synthetic products, in which the natural is a series of closely combined compounds, called synthetic rubber, other compounds can also be used to make synthetic, its performance is better than natural.

2022-11-28

Rubber cable equipment manufacturers tell you a little knowledge of rubber cable

Rubber sheathed cable equipment manufacturers tell you that rubber sheathed cable is a flexible movable cable made of multiple strands of thin copper wire as conductor, covered with rubber insulation and rubber sheath. Generally speaking, it includes general-purpose rubber flexible cables, welding machine cables, submersible motor cables, radio equipment cables, and photographic light source cables. Rubber sheathed cables are widely used in various electrical equipment, such as household appliances, motors, electrical equipment and mobile power cords for appliances. At the same time, it can be used indoors or outdoors. According to the size of the mechanical external force, the cable can be divided into light, medium and heavy three categories. There are also appropriate connections in the cross section.

2022-11-25

Analysis of medium voltage XLPE insulated power cable shielding

Shielding plays an important role in medium voltage cross-linked polyethylene. It can improve the uniformity of electric field distribution. According to the standard understanding, shielding is divided into non-metallic shielding (conductor shielding, insulation shielding) and metal shielding (copper tape, copper wire).

2022-05-13

How to repair the local defects of wire and cable insulation sheath under the analysis of three-layer co-extrusion head?

The use of wire and cable we will often encounter insulation rupture or local defects, then, encounter these problems should be how to solve it?

2022-05-13

Preparation of three-layer co-extrusion dry cross-linked cable production line before start-up

Preparation of three-layer co-extrusion dry cross-linked cable production line before driving: The upper and lower closing pads and molds are prepared according to the cable specifications produced by the (I) selection of the closing pad and the mold, and installed in the extruder. (II) extruder heating and heat preservation In order to make the temperature of the extruder meet the process requirements, the start-up heating time shall not be less than 3-4 hours.

2022-05-13

The role of rubber sleeve extruder

Sealing strip manufacturers should be cautious when purchasing equipment, and the choice of equipment depends on the cost performance of the equipment. It depends on the configuration of the equipment and the market share of the equipment. The stability of the sealing strip equipment is very important in production. Without a stable equipment production, there is no way for the manufacturer's profit and product quality.

2022-05-13

Development Process of Plastic Extruder

The extruder originated in the 18th century. The manual piston extruder made by the JosehBramah of England in 1795 for the manufacture of seamless lead pipes is considered to be the world's top extruder. Since then, in the first 50 years of the 19th century, extruders were basically only used in the production of lead pipes, the processing of macaroni and other foods, and the brick and ceramic industries.

2022-05-13

Extrusion system for plastic extruder

The extrusion system includes a screw, a barrel, a hopper, a head, and a die. The plastic extruder plastic is plasticized into a uniform melt by the extrusion system, and is continuously extruded by the screw under the pressure established in this process.

2022-05-06

Plastic extruder automation level to improve

The end of the manual era plastic extruder automation level. At present, China's plastic extruder market is developing rapidly, and many new models have been launched. Through the joint efforts of technology and personnel in the industry, some major models such as exhaust extruder, tandem disc screw extruder, reciprocating pin screw extruder, foaming extruder, extruder with melt gear pump, tandem multi-stage extruder, planetary screw extruder, etc. are all produced by domestic manufacturers, with independent capabilities and independent intellectual property rights.

2022-05-06